（塑钢土）Selleys Knead it Underwater Epoxy Putty Steel Epoxy Putty 50gm

---

Knead It Underwater 50g

FEATURES
-- Easy to use no mess.


-- Can be drilled, sawed, sanded, filed, tapped, machined or painted one hour after mixing.
-- Good adhesive strength.
-- Can be used to reshape, rebuild and repair a multitude of surfaces and applications.
-- Good gap filling properties.
-- Long-lasting, durable solution.
-- Heat resistant to 120°C continuously or 140°C intermittently.
-- Can be used under fresh or salt water.
-- Longer set time (less than 20 min).
-- Higher tack for underwater repairs..

HOW TO USE
1. Clean surface free of grease, dirt and dust. For best results, roughen bond area prior to cleaning.


2. Cut off required amount. Replace disc on remaining portion. To mix, knead with fingers to uniform color. If mixing is difficult, warm to room temperature. Wear gloves to avoid messing hands.


3. Apply to surface to be repaired (within 12 minutes of mixing) and work the material forcefully into the surface applying pressure until adhesion begins to take effect. Mould to shape if required. If material sticks to fingers, use the plastic wrapper to press the material in place.


4. For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.


5. After 20-30 minutes, Knead It Underwater will harden and begin to form a strong bond. Allow for longer cure times at lower temperatures.


6. After 60 minutes, Knead It Underwater may be drilled, sanded, machined, filed, sawed or painted.


7. Wash hands thoroughly with soap and water after use.